Fabric fridge frame

A used corrugated cardboard box was sitting around here collecting dust, so I decided to chop it up and make something out of it. (More on the chopping at the end of this post.) Voila, a magnetic picture frame.

To make this, cut a piece of corrugated cardboard to the size you want. (Make sure the opening is slightly smaller than the dimensions of the photo you intend to frame.) Cut a piece of cotton batting or thick fleece exactly the same size and glue it to the cardboard, then turn it face down. Next, cut your fabric into a rectangle that allows you enough extra to wrap around to the back of the frame. Trim the outer corners off at 45º and cut slits toward the inner corners. Then wrap the fabric to the back and glue. (I used some gel fabric glue, but it's messy. Next time: glue gun.)

Add a felt backing with either a slit for inserting your photo, or just stick on two separate pieces, one for the pocket and another strip across the top to hide the fabric's ugly raw edges. When you glue the felt on, apply the glue just outside of the area where the photo will sit. Make sure the outer edges are stuck down, too, and add some magnets to hold it on your fridge.

The reason I was desperate to chop up a cardboard box was so I could try out my new toy: this Skil Power Cutter. It's cordless, self-sharpening, and makes slicing through cardboard and foam core a piece of cake. If you have a job that requires precision and perfectly straight lines, this is not your tool, but for cutting things down to size quickly, it's perfect. Love it.

You have read this article fabric / tutorials with the title Fabric fridge frame. You can bookmark this page URL https://jenkrebs.blogspot.com/2008/11/fabric-fridge-frame.html. Thanks!